News

Hot rolled surface of titanium plate should be smooth and clean. The plates are permitted to be supplied with acid-alkali washing, sandblasting and...

In order to improve the utilization rate of materials, roll forging and cross rolling can be used as the first process of slender materials. Rotary...

Titanium is a single substance, titanium is a mixture. Therefore, titanium alloys have more diverse properties and a wider range of uses. Titanium...

Tantalum resources are few and expensive, so the utilization of secondary resources has special significance. The secondary resources of niobium an...

Since the surface of tantalum can form a dense and stable amorphous oxide film with high dielectric strength, it is easy to accurately and convenie...

However, when the target has obvious cracks, the charge is easily concentrated at the crack edge, resulting in abnormal discharge on the surface of...

The nickel plate is polished, the polished nickel plate is centrifugally ground, and the nickel target is produced. Because metal nickel has good m...

Vacuum environment or inert gas protection environment, pure molybdenum high temperature resistance 1200 degrees, molybdenum alloy high temperature...

hafnium targets are commonly used to prepare transparent electrode materials such as indium tin oxide (ITO) and zinc oxide (ZnO). Due to the high p...

Zirconium products are rich in variety and in various forms. The initial mineral form is zircon sand. After caustic soda, water washing and other t...

At the same time, experts remind that should be according to the use of chopsticks timely replacement, titanium chopsticks is a good solution to th...

Stamping performance is poor, thermoplasticity is good. Various forms of welding can be performed, with good performance, and the strength and plas...